Fast Fix Tape
What is FAST Fix Tape?
FAST Fix is the ultimate pipe repair system for your temporary emergency pipe repair needs. It’s designed to provide quick repair solutions for a variety of problems. Great for travel kit, outdoors, survivalist gear, or anywhere you many need to fix something in a hurry. Sold in more than 20 countries with millions of happy customers. A successful pipe and tools repair can be achieved in only 30 minutes.
FAST Fix Pipe Repair System includes a woven fiberglass wrap impregnated with a water−activated polyurethane resin and FAST Fix Sandpaper and a pair of gloves.
FAST Fix can be used on all types of materials including stainless steel, copper, PVC, steel, rubber, concrete, metal, galvanized, fiberglass, and polypropylene. It can be applied on cracked, fractured, corroded, damaged and leaking pipes, around difficult shapes including straight lengths, tee and elbow joints, couplings and clamps. It is suitable for use on wet or dry pipes. It can even be applied underwater, in fresh or saltwater!
Why use FAST Fix
- Rapid & Instant repair
- Insulation
- Waterproof
- Anticorrosion
- High pressure resistant
- High temperature resistant
- Extend the life of the pipeline
FAST Fix Technical Data
Pressure
- Impact toughness≥30KJ/㎡
- Longitudinal Tensile Strength ≥12MPA
- Transverse Tensile Strength ≥32MPA
- Interlaminar Peeling Strength ≥20N/25MM
- Compression Strength ≥300N
Temperature & shelf time
- Temperature Range: -40℃ to 150℃
- Curing time: starting curing 3-5 min
- Curing totally: 1 hour
- Shelf Life: 3 years
- Life Time: beyond 18 years
Physic-chemical characters
- PH Value > 6
- Toxicity: No Toxicity
- Corrosion Resistance: YES
- Alkaline Resistant: YES
- Dielectric Strength: 35KV
- UV Resistance: YES
Notes
- Flash Point: Not Applicable
- Point of Explosion: Not Applicable
- Explosive Hazardousness: Not Applicable
- Fire Measures: Not Applicable
- Health and physical Symptoms (Each symptom): Not Applicable
How to use FAST Fix
Step 1
Clean and roughen the damaged area of the pipe with a metal file or wire brush. A clean roughened surface helps result in a successful repair.
Step 2
Apply to the pipe leak site within two minutes of mixing, forcing it into any cracks or holes.
Step 3
Open foil pouch and immerse FAST Fix in room temperature water for 10-15 seconds, squeeze the FAST Fix to allow water soak in evenly.
Step 4
Apply FAST Fix immediately around the damaged pipe area extending up to 50mm (2”) either side of the leak. It is important to apply the Wrap before the Plastic tape is cured.
Step 5
When wrapping, pull each layer tightly and firmly, using your hand to mould and squeeze the layers together. FAST Fix has a 4−5 minute work life, with full cure in 30 minutes.
For best results, the completed application should be no less than 10mm thick. Allow for 30 minutes for it to fully cured.